English
🠦 Deutsch
1.
Start the ObjectBrowser
2.
Select the "Working directory" of the project you want to update and click on edit.
If your project does not yet exist, please "add" the directory of your project.
working directory
3.
Select the "PLC Runtime Version" 3.1.4024.
set runtime
4.
Hit "Save" and compare the repositary with the working directory.
5
Hit "Compatible"
All compatible updates are now displayed. Also the system libraries.
compatible updates
6
Select at least all system libraries and hit "Download".
Copy the libraries to your working directory.
system libraries
TwinCAT version
7
Open your OES project and double click
the PLC node.
8
Set the "TwinCAT version" to 3.1.4024.
9
Execute a "Reload Standard".
10
The new objects for the Runtime 3.1.4024 are displayed. Hit "Apply and reload"
Apply and reload
11
Open your TwinCAT project and double click "SYSTEM".
12
Remove the checkmark from "Pin Version"
uncheck pin version
13
Save your project and close TwinCAT
14
Open TwinCAT XAE and, if not selected yet, select "Build 4024.xx".
select runtime
15
Now open your project.
open project
16
Double click "SYSTEM" and set the checkmark from "Pin Version" again.
check pin version
17
Save your project.
From now on OES opens the project with the correct setting for TwinCAT 3.1.4024.
Almost finished! If you using an active HMI component with Windows 10 like mPad, Rexroth, Beckhoff there is one more thing to do:
º
Please open "OpconSystemStartup.bat" with a text editor. The file is located in your
project fold under "\Targets\...
old OpconSystemStartup.bat
º
In the line for "C-LAN" "WaitForLanConnected.vbs" must be replaced by
NxWaitFoLanConnected.vbs
new OpconSystemStartup.bat
Deutsch
🠦 English
1.
Starten Sie den ObjecBrowser
2.
Wählen Sie den "Working directory" des Projekts, das Sie aktualisieren möchten, und klicken Sie auf bearbeiten.
Wenn Ihr Projekt noch nicht vorhanden ist, "fügen" Sie bitte das Verzeichnis Ihres Projekts hinzu.
Arbeitsverzeichnis
3.
Wählen Sie die "PLC Runtime Version" 3.1.4024
runtime wählen
4.
Klicken Sie auf "Speichern" und vergleichen Sie die Repositary mit dem Arbeitsverzeichnis.
5
Klicken Sie auf "Compatible".
Alle kompatiblen Updates werden nun angezeigt. Auch die Systembibliotheken.
kompatible Updates
6
Wählen Sie mindestens alle Systembibliotheken aus und klicken Sie auf "Download".
Kopieren Sie die Bibliotheken in Ihr Arbeitsverzeichnis.
Systembibliotheken
TwinCAT-Version
7
Öffnen Sie Ihr OES-Projekt und
doppelklicken Sie auf den SPS-Knoten.
8
Setzen Sie die "TwinCAT-Version" auf
3.1.4024.
9
Führen Sie einen "Reload Standard" aus.
10
Die neuen Objekte für die Runtime 3.1.4024 werden angezeigt.
Klicken Sie auf "Übernehmen und neu laden"
Übernehmen und neu laden
11
Öffnen Sie Ihr TwinCAT-Projekt und doppelklicken Sie auf "SYSTEM".
12
Entfernen Sie das Häkchen von "Pin Version".
"Pin Version" deaktivieren
13
Speichern Sie Ihr Projekt und schließen Sie TwinCAT.
14
Öffnen Sie TwinCAT XAE und wählen Sie, falls noch nicht selektiert, "Build 4024.xx".
Runtime auswählen
15
Öffnen Sie nun Ihr Projekt.
Projekt öffnen
16
Doppelklicken Sie auf "SYSTEM" und setzen Sie wieder das Häkchen von "Pin Version".
"Pin Version" aktivieren
17
Speichern Sie Ihr Projekt.
Ab sofort öffnet OES das Projekt mit der korrekten Einstellung für TwinCAT 3.1.4024.
Fast geschafft! Wenn Sie eine aktive HMI-Komponente mit Windows 10 wie mPad, Rexroth, Beckhoff verwenden, gibt es noch eine Sache zu tun:
º
Bitte öffnen Sie "OpconSystemStartup.bat" mit einem Texteditor. Die Datei befindet sich in
Ihrem Projektordner unter "\Targets\...".
OpconSystemStartup.bat alt
º
In der Zeile für "C-LAN" muss "WaitForLanConnected.vbs
durch "NxWaitFoLanConnected.vbs" ersetzt werden.
OpconSystemStartup.bat neu
... View more