Developer Portal Community

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 
    SOLVED

    integrated robotics - Brake release mode expected error

    integrated robotics - Brake release mode expected error

    Hudson
    Established Member

    Hello,

      One issue encountered during commissioning,  A alarm 'Brake release mode expected  to open the brakes without arm power' is occurred from time to time, I am not sure why the error is popped up and what the meaning is, I did not design any brake' code and activate brake test function from the Staubli controller. the following are cases:

    1.machine is running and robot is in the hlep position to wait part. but suddenly this alarm came out.

    2.execute a manaul sequence to move the robot from a nest to a help position in Z direction, but sddenly this alarm came out during moving

    thank you

    5 REPLIES 5

    TimoGotsmann
    Member

    Hello,

    This sounds pretty strange.

    Can you please check the following things:

    • Check if the Firmware of the Robot (univalPlcServer) is the same as tested with the Robot Peripheral (see documentation).
    • Activate the logging of the robot (status view of the robot unit) and wait for the error. If it appears, please post the logfile here or send it to the helpdesk.

    Based on the error number (>10000), it is an error that comes directly from the robot control
    and is only displayed by the PLC.

    I’m pretty sure that’s a problem on the Stäubli side...

    Hudson
    Established Member

    thank you for your quick response~

    I just checked the version via SRS software of Staubli, system version is S8.15 and eCAT is 4.5, but cannot find the uniVALplc server version, just only find a license enable information. about the uniVALplc client, I got the software from Staubli-CN and installed uniVALplc_s4.6.

    I used the robotics object version is 1.5.5, and checked the document, can only find the tested/support version, s8.10 and v4.5

    Here I also put the log file of robot, please check~ thank you

    Please take a look on the "Overview" view of the robot object - there should the software version of the stäubli be displayed.

    It doesn’t matter if you use UniValPLC 4.5 or UniValPLC 4.6 - both are supported.

    Important is, that the UniValPlc-Client version ( PLC side ) matches the UniValPlc-Server version ( Stäubli side ).

    Via the STD update dialog in CpStudio you can select the UniValPlc-Client version. 
    (The different NexeedStaubliUniValPlc versions must be located in you  STD\Peripherals folder )

    So far so good -  but from my point of view, you are still looking on the wrong side...

    As i already said, this error is genereted by the stäubli robot and the plc only displays this error message.

    You send us the log-file from the programmable robot object - but not the log of the stäubli robot itself...

    Please take a look on the Stäubli teach panel and check the log messages there...

    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist