No alarm display---OES4.11

[IAreCBTEF]

I used OES4.5 before, download the program after configuration, the HMI will have an alarm display,
But now I changed to OES4.11 and there is no alarm display, I also added Event LIST.

[Düscha]

Have you add a EventList to your project

After add Eventlist deploy not forgot

[nexidator]

Does your HMI show the whole project or have you set the HMI focus to a branch of the project? In the latter case, you need an EventList add-on on that branch, not only on the top-level ModeForwarder.

[IAreCBTEF]

Hello  Düscha，

As I said aboveI added this Add-ons in Station，And the OES program is deployed to the IPC.

But no alarm message is displayed.

[IAreCBTEF]

Hello  nexidator,

I will try your method tomorrow, add to NxCmdHandlerTemplate

Thank you!