Developer Portal Community

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 
    SOLVED

    Input signal problem

    Input signal problem

    IAreCBTEF
    Long-established Member

    I encountered a very strange problem, the PLC hardware can see the input signal

    (for example, _K050A0_Channel_6 is ON), but it is still OFF in BinIo.

     

    015.jpg015_1.jpg015_2.jpg

    6 REPLIES 6

    nexidator
    Community Moderator
    Community Moderator

    What about the BinIo element that is directly linked to the input, i.e. bus_K050A0_Channel_6? Does it also have the wrong state?

    IAreCBTEF
    Long-established Member

    Hello  nexidator,

    There is no problem with the BinIo element linking the input directly, the configuration is correct.

    Let me describe it in more detail:

    The input module in OES uses the default name (for example: _K050A0_Channel_6) to configure the first switch in the emergency addon, there is no problem. But if you rename the input point of the input module, and then configure it to the first switch in the emergency addon, the input point configured in Twincat3 will not work properly. I have repeatedly tested the results are the same. I don't know why?

    Attachment: The input is configured with the default name, and the video display is ok.

     

    20.jpg20_1.jpg

    MarvinW
    Long-established Member

    After you rename digital IO, you need to run the IO linking process again:

    MarvinW_0-1659501522150.png

    When you build, you would actually get a message like this, reminding you of the problem:

    MarvinW_1-1659501564556.png

    Maybe this is what's happening to you?

    IAreCBTEF
    Long-established Member

    First of all thank you very much for your guidance and help,

    I just followed your method. But the problem is still there, I think it is very strange, If I don't use this emergency stop Addon, this problem should not occur. .

    Of course, I can not rename, but in the actual project, it still needs to be renamed according to the BMK rules.

    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist