Developer Portal Community

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    HOW to run a Control plus V1 program on a Control plus V2 image.

    English 🠦 Deutsch
    1. Start the ObjectBrowser  
    2. Select the "Working directory" of the project you want to update and click on edit.
      If your project does not yet exist, please "add" the directory of your project.
      working directoryworking directory
         
    3. Select the "PLC Runtime Version" 3.1.4024. set runtimeset runtime
         
    4. Hit "Save" and compare the repositary with the working directory.
    5 Hit "Compatible"  
      All compatible updates are now displayed. Also the system libraries.
      compatible updatescompatible updates
         
    6 Select at least all system libraries and hit "Download".
      Copy the libraries to your working directory.
      system librariessystem libraries
         
        TwinCAT versionTwinCAT version
    7 Open your OES project and double click
      the PLC node.
       
    8 Set the "TwinCAT version" to 3.1.4024.
       
    9 Execute a "Reload Standard".
       
         
    10 The new objects for the Runtime 3.1.4024 are displayed. Hit "Apply and reload"
      Apply and reloadApply and reload
         
    11 Open your TwinCAT project and double click "SYSTEM".
    12 Remove the checkmark from "Pin Version"
      uncheck pin versionuncheck pin version
         
    13 Save your project and close TwinCAT  
         
    14 Open TwinCAT XAE and, if not selected yet, select "Build 4024.xx". select runtimeselect runtime
         
    15 Now open your project.  
      open projectopen project
         
    16 Double click "SYSTEM" and set the checkmark from "Pin Version" again.
      check pin versioncheck pin version
         
    17 Save your project.  
      From now on OES opens the project with the correct setting for TwinCAT 3.1.4024.

     

    Almost finished!
    If you using an active HMI component with Windows 10 like mPad, Rexroth, Beckhoff there is one more thing to do:

    º Please open "OpconSystemStartup.bat" with a text editor. The file is located in your
      project fold under "\Targets\...
      old OpconSystemStartup.batold OpconSystemStartup.bat
    º In the line for "C-LAN" "WaitForLanConnected.vbs" must be replaced by
      NxWaitFoLanConnected.vbs
      new OpconSystemStartup.batnew OpconSystemStartup.bat

     

     
    Deutsch 🠦 English
    1. Starten Sie den ObjecBrowser  
    2. Wählen Sie den "Working directory" des Projekts, das Sie aktualisieren möchten, und klicken Sie auf bearbeiten.
      Wenn Ihr Projekt noch nicht vorhanden ist, "fügen" Sie bitte das Verzeichnis Ihres Projekts hinzu.
      ArbeitsverzeichnisArbeitsverzeichnis
         
    3. Wählen Sie die "PLC Runtime Version" 3.1.4024 runtime wählenruntime wählen
         
    4. Klicken Sie auf "Speichern" und vergleichen Sie die Repositary mit dem Arbeitsverzeichnis.
    5 Klicken Sie auf "Compatible".  
      Alle kompatiblen Updates werden nun angezeigt. Auch die Systembibliotheken.
      kompatible Updateskompatible Updates
         
    6 Wählen Sie mindestens alle Systembibliotheken aus und klicken Sie auf "Download".
      Kopieren Sie die Bibliotheken in Ihr Arbeitsverzeichnis.
      SystembibliothekenSystembibliotheken
         
        TwinCAT-VersionTwinCAT-Version
    7 Öffnen Sie Ihr OES-Projekt und
      doppelklicken Sie auf den SPS-Knoten.
       
    8 Setzen Sie die "TwinCAT-Version" auf
      3.1.4024.
       
    9 Führen Sie einen "Reload Standard" aus.
         
    10 Die neuen Objekte für die Runtime 3.1.4024 werden angezeigt.
      Klicken Sie auf "Übernehmen und neu laden"
      Übernehmen und neu ladenÜbernehmen und neu laden
         
    11 Öffnen Sie Ihr TwinCAT-Projekt und doppelklicken Sie auf "SYSTEM".
    12 Entfernen Sie das Häkchen von "Pin Version".
      "Pin Version" deaktivieren"Pin Version" deaktivieren
         
    13 Speichern Sie Ihr Projekt und schließen Sie TwinCAT.
         
    14 Öffnen Sie TwinCAT XAE und wählen Sie, falls noch nicht selektiert, "Build 4024.xx". Runtime auswählenRuntime auswählen
         
    15 Öffnen Sie nun Ihr Projekt.  
      Projekt öffnenProjekt öffnen
         
    16 Doppelklicken Sie auf "SYSTEM" und setzen Sie wieder das Häkchen von "Pin Version".
      "Pin Version" aktivieren"Pin Version" aktivieren
         
    17 Speichern Sie Ihr Projekt.  
      Ab sofort öffnet OES das Projekt mit der korrekten Einstellung für TwinCAT 3.1.4024.

     

    Fast geschafft!
    Wenn Sie eine aktive HMI-Komponente mit Windows 10 wie mPad, Rexroth, Beckhoff verwenden, gibt es noch eine Sache zu tun:

    º Bitte öffnen Sie "OpconSystemStartup.bat" mit einem Texteditor. Die Datei befindet sich in 
      Ihrem Projektordner unter "\Targets\...".
      OpconSystemStartup.bat altOpconSystemStartup.bat alt
    º In der Zeile für "C-LAN" muss "WaitForLanConnected.vbs
      durch "NxWaitFoLanConnected.vbs" ersetzt werden.
      OpconSystemStartup.bat neuOpconSystemStartup.bat neu
    Version history
    Last update:
    ‎09-17-2021 06:02 PM
    Updated by:
    Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist