10-31-2023 05:52 PM
HMI shows violet colors in the project tree with cone icons. Never seen before.
Image attached.
Control on is allowed, ethercat bus is correct and nexeed license is also working. Every unit is in operational state.
Solved! Go to Solution.
11-01-2023 05:35 AM
The cone means that this unit's Dummy Command Mode (DCM) is turned on. The violet color I am not sure. Is your simulation mode enabled?
11-03-2023 10:50 AM
The violet color in this place also means Dummy Command Mode.
Yes, the violet color is also used to indicate simulation mode in the mode switch. The same color is used because DCM and simulation are somewhat related: In both cases, the machine hardware won't move.
11-03-2023 04:48 PM
Thank you!