yesterday
Hello everyone,
we just have the situation that we want to have an additional HMI view on a different panel.
The DVI-Port is already used. We want an additional panel which can be mounted on top of the CP3916.
This view should only show a few variables and there should be no touch, input etc.
What it the easiest and cheapest way to get the additional view running.
yesterday - last edited yesterday
You can using for example this one
https://www.beckhoff.com/en-gb/products/ipc/pcs/accessories/cu8810-0010.html
Or this one for non touch
https://www.beckhoff.com/en-gb/products/ipc/pcs/accessories/cu8815.html
9 hours ago
I am afraid these devices won't help in your case. The CX2020 only has one DVI output, so a splitter/repeater cannot generate a second screen content.
Back to the original question: You are asking for the easiest and cheapest way to do this. I guess as always the easiest and the cheapest way are not the same...
What you need is an active device with CPU and Windows OS that can run the SecondHmi runtime. So, these are the possibilities from the Nexeed Automation catalog:
Or alternatively, you use a VPB40 with two graphics outputs instead of the CX2020.
I know none of this possibilities is really cheap. You can probably find cheaper non-standard hardware, but deployment won't work without a Nexeed image and you will not get any support from BCI.