About Thorsten_Brach

Probably it's just a comprehension problem 😉 This overview does not show the history of the performed measurements, but an overview of the current measurement is displayed . So especially in the case that you have 10 or more measuring points, you can immediately see the results of the individual measurements without having to search for the individual results in the standard view via the combo box. if you have only one measuring point, then this view has no advantage and may confuse more than it helps - but you can simply hide this view in OES... ... View more

Please take a look to this topic : https://community.developer.bosch.com/t5/Control-plus/Run-HMI-Locally/m-p/54575/highlight/false#M222 Sounds like the same problem 😉 ... View more

Did you check the AMS Net ID and ADS Port in your configuration ? The configuration must match to your PLC target system : For a local running PLC - you can use 127.0.0.1.1.1 as  AMS Net ID. You can find the used ADS Port in your PLC project : If you want to connect to a PLC on a remote IPC, you also must have a valid route to the target system :         ... View more