Simulation of the axis

[IAreCBTEF]

At present, I am testing the simulation of the axis, but there is an OPC UA error. I don't know how to set this up. If possible, please provide some reference suggestions, thank you!

[IAreCBTEF]

This is not a fatal alarm, it doesn't affect my simulation tests. But I still want to find out, if possible.

It's best to remove this warning 😄

[SteffenR- · Accepted solution]

You can remove this event by yourself if you uncheck this parameter of the Simulation add-on:

You need this parameter only if you are using our 3D simulation like in the example project Digital Machine .