01-31-2024 11:27 AM
Hi folks,
I have to prepare some SSDs with an older version of ServiceStick V2.20. During the installation I'm prompted with the following error, as seen also on the picture:
Error (20015) applying image – please restart system or retry applying image
I have restarted and reapplied the image, without success. The error message appears again.
Can anyone give me some hints as to what is causing this error?
Solved! Go to Solution.
02-01-2024 10:28 AM
I did the image installation in a normal environment (in a stations' cabinet, with working fan, not known to have heat problems before). Unfortunatly I don't have any Rexroth SSD for testing. The stick should be fine, as it has been used before...
The only thing that might be suspicious in our case is the type of SSD. But this is a bit strange for me, because I have a lot of workstations with such type of SSDs.
Anyway, thanks for the suggestions...
02-07-2024 09:20 AM
I'm back with a feedback/solution. Did a service stick update to the latest version and successfully installed the V2.22 image without error on the PLC.