04-01-2022 08:08 AM
Hello,
I have a problem on the PLC, that when I start the HMI, it says that "Target machine could not be found" (see attached picture), but the PLC is in RUN, and I don't understand what is the problem!
Maybe someone of you, had this problem before, and knows the solution! 🙂
Thanks!
Solved! Go to Solution.
04-01-2022 08:30 AM - edited 04-01-2022 09:00 AM
Please take a look to this topic :
https://community.developer.bosch.com/t5/Control-plus/Run-HMI-Locally/m-p/54575/highlight/false#M222
Sounds like the same problem 😉
04-01-2022 08:40 AM
Hi,
I have checked, and it's the same. I can deploy, it`s working, I can see it on the PLC, that is running, the only problem is when open the HMI, it can't connect to the target, and it`s showing me the pop up window, that the PLC is stopped.
04-01-2022 08:47 AM
I've checked "better", and it was a difference. I changed, and now it`s OK. Thanks! 🙂