About Karthiga_R

Karthiga_R · ‎03-17-2020

Hi Chandan, Apart from the above info, i have flashed BoschXDKCloudConnectivity template application in my XDK device and i am able to communicate with Bosch IOT Things Network. - So you might faced Network issue. Thank You 🙂

Karthiga_R · ‎03-17-2020

Hi Chandan, BoschCloudConnectivity template application uses LWM2M protocol in backend to communicate with Bosch IOT suite. IOT suite going to stop LWM2M supported communication and going to use MQTT.- I am not sure IOT suite already stopped supporting LWM2M, in this case BoschCloudConnectivity will not communicate with IOT suite things network. So, BoschCloudConnectivity template application also will be migrated from lwm2m to mqtt. This development activity will be started soon and will be available in workbench in future release. Thank You 🙂

Karthiga_R · ‎03-16-2020

Hi Albert, - By simultaneously pressing button 1 and reset (using on/off buttons) XDK device, it goes to bootloader mode. In bootloader mode you can see red and yellow led glowing. - Connect com port using teraterm, hterm or any other SWs - Issue a command i to read bootloader version and e to erase flash area and then disconnect com port from teraterm - In workbench select 'Window-> Preferences->XDK->Bootloader and FOTA' and provide your bootloader version. Ex : 1.2.0 - Now restart the XDK device, if com port detected in workbench , build valid application and flash it. Thank You 🙂

Karthiga_R · ‎03-11-2020

Hi Pampi, In workbench when you click 'Reboot' XDK device goes to bootloader mode. By pressing button 1 and ON/OFF simultaneously also device can go to bootloader mode manually. In bootloader mode when you issue the command 'g' and 'w', you will get Wifi Mac address and Ble mac address printed in workbench console respectively. Thank You 🙂

Karthiga_R · ‎03-11-2020

Hi Nicolas, SendDataOverMQTT template application uses payload in string format. We have another template application called PpmpUnide which uses cJson to frame its payload in JSON format. So you can refer this application as follows to implement payload in Json format in SendDataOverMQTT application. Thank You 🙂

Bosch Shared

About Karthiga_R

Re: BoschXDKCloudConnectivity - Cannot publish sen...

Re: BoschXDKCloudConnectivity - Cannot publish sen...

Re: Force reset XDK

Re: Get MAC adress with Mita

Re: Can the Payload be an object in JSON format?

Still looking for something?