Integrated Dispensing package question

[SXN2SZH]

I met an issue when use integrated dispensing package.

First, create new project with ProcessEdit.

Second, run cnc file but no axis move and no errors. It always statys on 'N101'

[Bianca]

This behaviour could be explained if the M function is still active and configured as a blocking function. You can check the status of the M function in the OutCfg structure of the CNC portal object. If the synchronisation type of the M70 is configured as a blocking function, the boolean value must be reset to allow the CNC to continue. The configuration of the M-functions is part of the SDA parameters in the channel configuration of the CNC central in TwinCAT (e.g. synchronisation type 4 equals stop at the end of the line)

(Extract from the SDA parameters)