I flash my code on the XDK Sensor and when the sensor try to connect to the Wlan it throw following error message.
INFO | XDK DEVICE 1: Error in WLAN package.
INFO | XDK DEVICE 1: Package ID: 10
INFO | XDK DEVICE 1: Module ID: 1
INFO | XDK DEVICE 1: Severity code: 2
INFO | XDK DEVICE 1: Error code: 13
I develope with the workbench 3.6.1.
Error comes during WLAN Initialisation.
Are you Flashing XDK Workbench Template Application? or
Are you Flashing your own application?
If you are flashing your own application, Please make sure that WLAN Initialisation is properly done
I have my own programm and i used the bosch xdk wlan testprogram.
I have one sensor, it works fine with my own code,
but two other sensors not working with the code.
Do i have to initalise something that the wlan works?
Based on the Error Which you shared, Error came from BCDS_WLAN_MODULE_ID_WLAN_DRIVER Module ID.
Can you try to upgrade Wifi Chip and Check ?
Download WiFi_firmware_update.zip file from https://developer.bosch.com/web/xdk/wi-fi-enterprise link
It has 2 application,