Developer Portal Community

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    XDK Error message while Flashing

    chris2
    Occasional Visitor

    XDK Error message while Flashing

    Hello,

    I want to flash my XDK (Version 1.1.0). But an error occured as follows:

    chris2_0-1623226133915.png

     

    The LEDs are blinking, so I assume a fatal error.

     

    This is my config.xml:

     

    <?xml version="1.0" encoding="us-ascii"?>
    <!DOCTYPE datalogger SYSTEM "../datalogger.dtd">
    <!--This comment is required for xml parser to correctly parse the file.-->
    <datalogger>
    <sensors>
    <bmi160>
    <enabled>true</enabled>
    <!--gyro_odr possibilities : 25Hz-0x06,50Hz-0x07,100Hz-0x08,200Hz-0x09,400Hz-0x0A,800Hz-0x0B,1600Hz-0x0C,3200Hz-0x0D-->
    <gyro_odr>0x0d</gyro_odr>
    <!--gyro_bw possibilities : OSR4-0X00,OSR2-0X01,NORMAL-0X02,CIC-0X03. Refer Datalogger User manual for more details-->
    <gyro_bw>0x02</gyro_bw>
    <!--gyro_range possibilities : 2000d/s-0X00,1000d/s-0X01,500d/s-0X02,250d/s-0X03,125d/s-0X04-->
    <gyro_range>0x04</gyro_range>
    <!--accel_odr possibilities : 0.78Hz-0x01,1.56Hz-0x02,3.12Hz-0x03,6.25Hz-0x04,12.5Hz-0x05,25Hz-0x06,50Hz-0x07,100Hz-0x08,200Hz-0x09,400Hz-0x0A,800Hz-0x0B,1600Hz-0x0C-->
    <accel_odr>0x0c</accel_odr>
    <!--accel_bw possibilities : OSR4-0X00,OSR2-0X01,NORMAL-0X02,CIC-0X03,RES_AVG2-0X04,RES_AVG4-0X05,RES_AVG8-0X06,RES_AVG16-0X07. Refer Datalogger User manual for more details-->
    <accel_bw>0x09</accel_bw>
    <!--accel_range possibilities : 2G-0X03,4G-0X05,8G-0X08,16G-0X0C-->
    <accel_range>0x0c</accel_range>
    </bmi160>
    <bmm150>
    <enabled>false</enabled>
    <!--odr possibilities : 10Hz-0X00,2Hz-0X01,6Hz-0X02,8Hz-0X03,15Hz-0X04,20Hz-0X05,25Hz-0X06,30Hz-0X07-->
    <odr>0x07</odr>
    <rep_xy>0x07</rep_xy>
    <rep_z>0x1A</rep_z>
    </bmm150>
    <bma280>
    <enabled>true</enabled>
    <!--accel_bw possibilities : 7.81Hz-0X00,15.63Hz-0X01,31.25Hz-0X02,62.50Hz-0X03,125Hz-0X04,250Hz-0X05,500Hz-0X06-->
    <accel_bw>0x06</accel_bw>
    <!--accel_range possibilities : 2G-0X00,4G-0X01,8G-0X02,16G-0X03-->
    <accel_range>0x03</accel_range>
    </bma280>
    <bme280>
    <enabled>false</enabled>
    <odr>0xf9</odr> <!--not used-->
    <!--power_mode possibilities : Sleep-0X00,Forced-0X01,Normal-0X03. Refer sensor datasheet for more details-->
    <power_mode>0x03</power_mode>
    <!--standby_dur possibilities : 1ms-0X00,63ms-0X01,125ms-0X02,250ms-0X03,500ms-0X04,1000ms-0X05,2000ms-0X06,4000ms-0X07-->
    <standby_dur>0x00</standby_dur>
    <!--filter_coeff possibilities : OFF-0X00,2-0X01,4-0X02,8-0X03,16-0X04. Refer Datalogger User manual for more details-->
    <filter_coeff>0x00</filter_coeff>
    <!--oversamp_* possibilities : Skipped-0X00,1-0X01,2-0X02,4-0X03,8-0X04,16-0X05. Refer Datalogger User manual for more details-->
    <oversamp_temperature>0x04</oversamp_temperature>
    <oversamp_pressure>0x04</oversamp_pressure>
    <oversamp_humidity>0x04</oversamp_humidity>
    <!--read_interval possibilities : 1sec-0x01 to 1month-0x278D00 -->
    <read_interval>0x3c</read_interval>
    </bme280>
    <bmg160>
    <enabled>false</enabled>
    <!--gyro_bw possibilities : 500Hz-0X00,230Hz-0X01,116Hz-0X02,47Hz-0X03,23Hz-0X04,12Hz-0X05,64Hz-0X06,32Hz-0X07-->
    <gyro_bw>0x03</gyro_bw>
    <!--gyro_range possibilities : 2000d/s-0X00,1000d/s-0X01,500d/s-0X02,250d/s-0X03,125d/s-0X04-->
    <gyro_range>0x02</gyro_range>
    </bmg160>
    <max44009>
    <enabled>false</enabled>
    <!--integration_time possibilities : 800ms-0X00,400ms-0X01,200ms-0X02,100ms-0X03,50ms-0X04,25ms-0X05,12.5ms-0X06,6.25ms-0X07-->
    <integration_time>0x00</integration_time>
    <!--odr possibilities : 0.1Hz-0X00,25Hz-0xf9-->
    <odr>0x01</odr>
    <!--continuous_mode,manual_config possibilities : 0x01-disable,0x00-enable-->
    <continuous_mode>0x00</continuous_mode>
    <manual_config>0x00</manual_config>
    <!--cdr possibilities : 0x01-normal,0x00-high-->
    <cdr>0x00</cdr>
    </max44009>
    <aku340> <!-- Note: enable aku340, only with other sensors disabled-->
    <enabled>false</enabled>
    <!--samp_freq possibilities : 120Hz-0x78 to 22050Hz-0x5622-->
    <samp_freq>0x5622</samp_freq>
    </aku340>
    <marker>
    <enabled>true</enabled>
    </marker>
    </sensors>

    <system>
    <msgpack>
    <!--data format: messagepack-false, custom-true-->
    <msgpack_enabled>true</msgpack_enabled>
    </msgpack>
    <autosave>
    <enabled>true</enabled>
    <!--save_time: 1min(0x01) to 24h(0x05A0)-->
    <save_time>0x01</save_time>
    </autosave>
    </system>

    <datatransfer>
    <wifi>
    <enabled>false</enabled> <!--For wifi streaming set true and configure WLAN credentials in wlan.txt, For SD card logging, set false-->
    <sntp_enabled>false</sntp_enabled> <!--configure WLAN credentials in wlan.txt if set true-->
    <sntp_globalAddress>0.de.pool.ntp.org</sntp_globalAddress> <!--Configure the server address to get timestamp-->
    <wifi_serverPort>6666</wifi_serverPort> <!--Configure server port required for WiFi streaming-->
    <wifi_serverIP>127.0.0.1</wifi_serverIP> <!--Configure server IP address required for WiFi streaming-->
    </wifi>
    </datatransfer>
    </datalogger>

     

    Currently the Wlan.txt and the config.xml is on the SD Card.

     

    Anyone can help?

     

    Tags (1)
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist