Control plus Master Image V2 V10.17

[nexidator]

English

🠦 Deutsch

Content

• Service Stick V10.17
• Master Image V10.17

Service Stick V10.17

The image package W10LTSC2019.* contains the following images:
Target system	Version	Date	State
Rexroth VPB40.4	V10.16	2023-11-15	Current development path
Rexroth VR31.xx	V10.16	2023-11-15	Current development path
Beckhoff C6930-0060	V10.16	2023-11-15	Current development path
Beckhoff C6017-0010	V10.16	2023-11-15	Current development path
Beckhoff CPx7xx-0010	V10.16	2023-11-15	Current development path
Beckhoff CX2033-017x	V10.16	2023-11-15	Current development path
Bosch mPad	V10.17	2024-01-20	Current development path

The service stick contains the following realtime packages:
Realtime Package	Installer	Version
TwinCAT 3.1.4024.12	TwinCAT3 XAR/ADS	3.1.4024.12
	TwinCAT3 TF6310 (TCP/IP Server)	3.1.9
	TwinCAT3 TF6100 (OPC-UA Server)	4.3.32.0
	TwinCAT3 TF3300 (Scope Server)	3.4.3143.7
TwinCAT 3.1.4024.29	TwinCAT3 XAR/ADS	3.1.4024.29
	TwinCAT3 TF6310 (TCP/IP Server)	3.2.7.0
	TwinCAT3 TF6100 (OPC-UA Server)	4.4.53.0
	TwinCAT3 TF3300 (Scope Server)	3.4.3146.11
TwinCAT 3.1.4024.47	TwinCAT3 XAR/ADS	3.1.4024.47
	TwinCAT3 TF6310 (TCP/IP Server)	3.3.15.0
	TwinCAT3 TF6100 (OPC-UA Server)	4.4.66.0
	TwinCAT3 TF3300 (Scope Server)	3.4.3147.16

Master Image V10.17

Bugfixes

Bosch mPad : final setup stops with error 1618 (on image V10.16)

Deutsch

🠦 English

Inhalt

• Service Stick V10.17
• Master Image V10.17

Service Stick V10.17

Das Image-Package W10LTSC2019.* enthält die folgenden Images:
Zielsystem	Version	Datum	Status
Rexroth VPB40.4	V10.16	15.11.2023	Aktueller Entwicklungspfad
Rexroth VR31.xx	V10.16	15.11.2023	Aktueller Entwicklungspfad
Beckhoff C6930-0060	V10.16	15.11.2023	Aktueller Entwicklungspfad
Beckhoff C6017-0010	V10.16	15.11.2023	Aktueller Entwicklungspfad
Beckhoff CPx7xx-0010	V10.16	15.11.2023	Aktueller Entwicklungspfad
Beckhoff CX2033-017x	V10.16	15.11.2023	Aktueller Entwicklungspfad
Bosch mPad	V10.17	20.01.2024	Aktueller Entwicklungspfad

Der Service Stick enthält die folgenden Realtime Packages:
Realtime Package	Installer	Version
TwinCAT 3.1.4024.12	TwinCAT3 XAR/ADS	3.1.4024.12
	TwinCAT3 TF6310 (TCP/IP Server)	3.1.9
	TwinCAT3 TF6100 (OPC-UA Server)	4.3.32.0
	TwinCAT3 TF3300 (Scope Server)	3.4.3143.7
TwinCAT 3.1.4024.29	TwinCAT3 XAR/ADS	3.1.4024.29
	TwinCAT3 TF6310 (TCP/IP Server)	3.2.7.0
	TwinCAT3 TF6100 (OPC-UA Server)	4.4.53.0
	TwinCAT3 TF3300 (Scope Server)	3.4.3146.11
TwinCAT 3.1.4024.47	TwinCAT3 XAR/ADS	3.1.4024.47
	TwinCAT3 TF6310 (TCP/IP Server)	3.3.15.0
	TwinCAT3 TF6100 (OPC-UA Server)	4.4.66.0
	TwinCAT3 TF3300 (Scope Server)	3.4.3147.16

Master Image V10.17

Fehlerbehebungen

Bosch mPad : finales Setup stoppt mit Fehler 1618 (bei Image V10.16)

[tommy3000]

How can I find out, which version on my image stick is?

[nexidator]

In the folder Opcon\Images.OCP (Control plus V1) or Nexeed\Images.NXA (Control plus V2) on the image stick, there is a file with extension .cfg. You can open it with a text editor and see what image versions are on the stick.