Developer Portal Community
- Top Results
- Community
- Nexeed Automation
- News
- Important customer information – Status change Service of Nexeed Automation Control plus V...
We are still working on migrating to the new Bosch Connected Industry Online Portal. Stay tuned! Click here for the latest updates.
Important customer information – Status change Service of Nexeed Automation Control plus V1
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
Ladies and Gentlemen,
with Nexeed Automation Control plus V1, we have offered reliable and sustainable solutions for automation technology over 11 years and successfully used them in many projects.
As a distributor, we are required to always offer reliable products and the best possible solution for your tasks. New trends and changes in IT and hardware solutions are now forcing us to take the next step in our product life cycle.
Therefore, we would like to inform you that our software and systems based on Nexeed Automation Control plus V1 will be in the service status from 31.12.2021 onwards. From this point on, no further active development takes place. Critical errors will only be fixed in version V1.11.
It is still possible to order the Nexeed Automation Control plus V1 software system, the control systems and the accessory components from us as a service part.
The following materials are affected by the discontinuation:
| Article no. | Description |
| Licences | |
| 3.800.590.132 | NXA-LC-CP-V1 |
| 3.800.590.150 | NXA-LC-ControlPlus-APAS-V1 |
| Control units | |
| 3800 590.039 | C-PS-mPad-x86-GGmT |
| 3.800.590.049 | C-PS-mPad-x86-GGmT-Cam |
| 3.800.590.041 | C-PS-mPad-x86-GGmT-S |
| 3.800.590.174 | C-PS-mPad-x86-GGmT-AS |
| Display units | |
| 3.800.590.129 | C-PS-VEP15.6-x86-HMI-EG |
| 3.800.590.130 | C-PS-VEP15.6-x86-HMI-GG |
| 3.800.590.139 | C-PS-VDP15.3-HMI-EG |
| 3.800.590.140 | C-PS-VDP15.3-HMI-GG |
| 3.800.590.152 | C-PS-VDP21.3-HMI-GG |
| Control systems | |
| 3.800.590.042 | C-CS-G2-VPB40.3/2-i7-SSD-EC-PLC-HMI |
| 3.800.547.668 | C-CS-G2-VPB40.3-i7-EC-PLC-HMI |
| 3.800.547.669 | C-CS-G2-VPB40.3-i7-EC-PLCm-HMI |
| 3.800.590.034 | C-CS-G2-VPB40.3-i7-EC-WL |
| 3.800.590.036 | C-CS-G2-VPB40.3-i7-EC-PLCm-HMI-WL |
| 3.800.590.042 | C-CS-G2-VPB40.3/2-i7-SSD-EC-PLC-HMI |
| 3.800.590.082 | C-CS-G2-VPB40.3-i7-EC |
| 3.800.590.081 | C-CS-G2-VPB40.3-i7-EC-USB |
| 3.800.590.074 | C-CS-G3-VPB40.4-SSD-EC-PLC-HMI |
| 3.800.590.078 | C-CS-G3-VPB40.4-SSD-EC-USB-PLC-HMI |
| 3.800.590.092 | C-CS-G2-VPB40.3-i7-EC- Spare part |
| 3.800.590.090 | C-CS-VPB40.4-SSD-EC- Spare part |
| 3.800.590.079 | C-CS-C6930-SSD-EC-USB-PLC-HMI |
| 3.800.590.058 | C-CS-C6930-SSD-EC-PLC-HMI |
| 3.800.590.053 | C-CS-CX2020-PLC-HMI |
| 3.800.590.080 | C-CS-CX2020-EC-USB-PLC-HMI |
| 3.800.590.062 | C-CS-CX2020-EC-PLC-HMI |
| 3.800.590.091 | C-CS-CX2020- Spare part |
| 3.800.590.121 | C-CS-C6015-EC-PLC-HMI |
| 3.800.590.123 | C-CS-C6015-EC-USB-PLC-HMI |
| 3.800.590.136 | C-CS-XM21-EC-PLC-HMI |
| 3.800.590.137 | C-CS-XM22-EC-PLC-HMI |
| 3.800.590.138 | C-CS-XM42-EC-PLC-HMI |
| Accessories | |
| 3.800.547.675 | C-EC-SUSBS V1 |
| System packages | |
| 3.800.590.141 | System package No. 1 |
| 3.800.590.142 | System package No. 2 |
| 3.800.590.143 | System package No. 3 |
| 3.800.590.144 | System package No. 4 |
| 3.800.590.145 | System package No. 5 |
| 3.800.590.146 | System package No. 6 |
| 3.800.590.147 | System package No. 7 |
| 3.800.590.148 | System package No. 8 |
| 3.800.590.149 | System package No. 9 |
| 3.800.590.178 | System package No. 10 |
| 3.800.590.179 | System package No. 11 |
| 3.800.590.187 | System package No. 12 |
All special customer variants derived from these will also be discontinued.
The components of the software system are still available on our download area in the software archive.
For some time now, we have been offering Control plus V2 as an alternative for the realisation of sophisticated control solutions.
The contact persons you know in our sales department will be happy to support you in switching to a current solution for your application.
OPCON Control
The software system OPCON Control (colloquialism OPCON classic) will finally enter the "End of service" phase on 01.07.2022.
From this point on, any service support must be requested individually and commissioned separately.
Best regards
Robert Bosch Manufacturing Solutions GmbH
Marc Bindel
Sehr geehrte Damen und Herren,
mit Nexeed Automation Control plus V1 haben wir über 11 Jahre hinweg zuverlässig und nachhaltig Lösungen für die Automatisierungstechnik angeboten und erfolgreich bei vielen Projekten zum Einsatz gebracht.
Als Inverkehrbringer sind wir aufgefordert, stets verlässliche Produkte und bestmögliche Lösung für Ihre Aufgaben anzubieten. Neue Trends und Veränderungen bei IT- und Hardwarelösungen zwingen uns nun, den nächsten Schritt in unserem Produkt-Life-Cycle zu gehen.
Daher wollen wir Sie informieren, dass sich unsere Software bzw. Systeme basierend auf Nexeed Automation Control plus V1, ab 31.12.2021 in den Status Service ĂĽbergeht. Ab diesem Zeitpunkt findet keine aktive Weiterentwicklung mehr statt. Kritische Fehler werden nur noch in der Version V1.11 behoben.
Eine Bestellung des Softwaresystems Nexeed Automation Control plus V1, den Steuerungssystemen und der Zubehörkomponenten ist als Serviceteil weiterhin bei uns möglich.
Nachfolgende Materialien sind von der AbkĂĽndigung betroffen:
| ArtikelNr | Bezeichnung |
| Lizenzen | |
| 3.800.590.132 | NXA-LC-CP-V1 |
| 3.800.590.150 | NXA-LC-ControlPlus-APAS-V1 |
| Bediengeräte | |
| 3800 590.039 | C-PS-mPad-x86-GGmT |
| 3.800.590.049 | C-PS-mPad-x86-GGmT-Cam |
| 3.800.590.041 | C-PS-mPad-x86-GGmT-S |
| 3.800.590.174 | C-PS-mPad-x86-GGmT-AS |
| Anzeigegeräte | |
| 3.800.590.129 | C-PS-VEP15.6-x86-HMI-EG |
| 3.800.590.130 | C-PS-VEP15.6-x86-HMI-GG |
| 3.800.590.139 | C-PS-VDP15.3-HMI-EG |
| 3.800.590.140 | C-PS-VDP15.3-HMI-GG |
| 3.800.590.152 | C-PS-VDP21.3-HMI-GG |
| Lizenzhardware | |
| 3.800.590.072 | C-CS-BasisBundle-LicenseKey-USB- TC1200-0020-1814 |
| 3.800.590.073 | C-CS-BasisBundle-LicenseKey-EC- TC1200-0010-1814 |
| Steuerungssysteme | |
| 3.800.590.042 | C-CS-G2-VPB40.3/2-i7-SSD-EC-PLC-HMI |
| 3.800.547.668 | C-CS-G2-VPB40.3-i7-EC-PLC-HMI |
| 3.800.547.669 | C-CS-G2-VPB40.3-i7-EC-PLCm-HMI |
| 3.800.590.034 | C-CS-G2-VPB40.3-i7-EC-WL |
| 3.800.590.036 | C-CS-G2-VPB40.3-i7-EC-PLCm-HMI-WL |
| 3.800.590.052 | C-CS-G2-VPB40.3/2-i7-SSD-EC-PLC-HMI |
| 3.800.590.082 | C-CS-G2-VPB40.3-i7-EC |
| 3.800.590.081 | C-CS-G2-VPB40.3-i7-EC-USB |
| 3.800.590.074 | C-CS-G3-VPB40.4-SSD-EC-PLC-HMI |
| 3.800.590.078 | C-CS-G3-VPB40.4-SSD-EC-USB-PLC-HMI |
| 3.800.590.092 | C-CS-G2-VPB40.3-i7-EC-Ersatzteil |
| 3.800.590.090 | C-CS-VPB40.4-SSD-EC-Ersatzteil |
| 3.800.590.079 | C-CS-C6930-SSD-EC-USB-PLC-HMI |
| 3.800.590.058 | C-CS-C6930-SSD-EC-PLC-HMI |
| 3.800.590.053 | C-CS-CX2020-PLC-HMI |
| 3.800.590.080 | C-CS-CX2020-EC-USB-PLC-HMI |
| 3.800.590.062 | C-CS-CX2020-EC-PLC-HMI |
| 3.800.590.091 | C-CS-CX2020-Ersatzteil |
| 3.800.590.121 | C-CS-C6015-EC-PLC-HMI |
| 3.800.590.123 | C-CS-C6015-EC-USB-PLC-HMI |
| 3.800.590.136 | C-CS-XM21-EC-PLC-HMI |
| 3.800.590.137 | C-CS-XM22-EC-PLC-HMI |
| 3.800.590.138 | C-CS-XM42-EC-PLC-HMI |
| Zubehör | |
| 3.800.547.675 | C-EC-SUSBS V1 |
| Systempakete | |
| 3.800.590.141 | Systempaket Nr1 |
| 3.800.590.142 | Systempaket Nr2 |
| 3.800.590.143 | Systempaket Nr3 |
| 3.800.590.144 | Systempaket Nr4 |
| 3.800.590.145 | Systempaket Nr5 |
| 3.800.590.146 | Systempaket Nr6 |
| 3.800.590.147 | Systempaket Nr7 |
| 3.800.590.148 | Systempaket Nr8 |
| 3.800.590.149 | Systempaket Nr9 |
| 3.800.590.178 | Systempaket Nr10 |
| 3.800.590.179 | Systempaket Nr11 |
| 3.800.590.187 | Systempaket Nr12 |
Ebenfalls abgekĂĽndigt werden alle daraus abgeleiteten Kundensondervarianten.
Die Komponenten des Softwaresystems stehen weiterhin auf unserem Downloadbereich im Software-Archiv zur VerfĂĽgung.
Bereits seit längerem bieten wir alternativ mit Control plus V2 zur Realisierung anspruchsvoller Steuerungslösungen an.
Die Ihnen bekannten Ansprechpartner unseres Vertriebs unterstützen Sie gerne bei der Umstellung auf eine aktuelle Lösung Ihrer Anwendung.
OPCON Control
Das Softwaresystem OPCON Control (Umgangssprache OPCON classic) wird endgültig zum 01.07.2022 in die Phase „End of service“ übergehen.
Jegliche ServiceunterstĂĽtzungen sind ab diesem Zeitpunkt einzeln anzufragen und getrennt zu Beauftragen.
Mit freundlichen GrĂĽĂźen
Robert Bosch Manufacturing Solutions GmbH
Marc Bindel
Still looking for something?
- Top Results