05-27-2020 05:42 PM
The Easycontrol CT200 sharing read-only on its EMS bus the desired and measured temperature, the measured humidity and the active programme, will enhance home automation systems that use the EMS data.
The EasyControl publishes on the EMS-bus but only the temperatures as '0.0', is my humble impression.
See e.g. https://github.com/proddy/EMS-ESP/issues?q=is%3Aissue+easycontrol.
Regards,
Paul
05-28-2020 10:19 PM
Thanks for the suggestion PaulGuijt...